A collaborative installation. This is what I determined my solo show in April needed. I will be collaborating with Bloomington writers who will be writing in response to some of my latest cloudscape linocuts. (See UPDATE at the end of this post.)
How hard can it be? If our family had a coat of arms, this would be inscribed in some obscure language. My idea was to take some of the words generated by area writers, carve them backwards on linoleum, and combine the words with cloud motifs on Japanese banners that will hang from the gallery’s twelve-foot ceilings. This week I embarked on my part of the installation…
Remembering what I’ve learned
I have done banners once before at First United Church. You can read about this installation at this blog post. As with any of my projects, I learned many things to do, and not to do, as the project progressed. I decided I needed to create some test banners before I began carving and printing my cloud-motif blocks.
Because I will be using a more diaphanous paper than my usual Rives BFK, I knew I needed to test inks. Luckily I had a selection of leftover inks, so I could test how different transparencies and chromatic intensities would look when printed on the paper and hung up. When light goes through the paper, the color can look washed out if it doesn’t have enough chroma.
I laid out all of the leftover inks with my many small brayers. To act as a record for later, I drew a small amount of ink across some scrap paper with my putty knives.
Papers were another variable I tested. I tested both rolls of Kozo and Thai Unryu papers. Each paper has both a smooth and rough side, and I found I preferred the smooth side for my purposes.
Printing on a banner
My previous banners were actually halved sheets of paper that were then joined in the middle. They wasn’t nearly long enough for this project, and I remember the taping process as extremely problematic. I initially thought I would have to print by hand with a spoon, but after doing this with two small blocks, I nixed the idea completely. I am addicted to my press.
So I took a deep breath and had the exciting task of troubleshooting how to print on the long rolls of paper using my press. I used the two blocks from last summer’s Solar Flags project (read about that project here) in my experiment.
Immediately I learned that I had to keep the paper rolled up at both ends, or it liked to creep below the press on either side of the bed and get crushed. Two Carrie Newcomer CDs from my studio playlist came in handy, and no, they do not go under the rollers.
I worried that the ink would smudge as it was gently rolled up, but it did not offset at all if I rolled up the paper loosely. Certainly this process will not allow for any reduction printing, and all of the alignments will be approximate and fluid. Somehow this sounds appealing to me.
Testing my creation
After printing five or six blocks on each banner, I unrolled the papers and let them dry completely over my press. The next day I put a dowel on the top with fishing line for hanging, and set off to climb a ridiculously tall ladder to hang up my tests.
Check back in a few weeks for the next stage of this installation…
UPDATE: Sadly we did not get enough sign-ups for the class, so the installation was cancelled. I hope to find an installation opportunity in the future so I can use what I’ve learned.